Today I present you the Scania HKL with all the trimmings.
The trailer is as appropriate in the LS17.
The ITR containers that fit on the trailer have been included and there are no complications with the ITR Pack.
The control for the Scania:
K = retract hook
M = extend hook (while the container is being loaded onto the trailer, you can extend the hook so that the truck does not lift off)
J = lower body
N = lift body
This control ONLY serves to get to the container ran without lifting the rear.
If you have the container coupled you can leave everything to the automatic and press X as usual.
The controller for the trailer:
Hold left Shift!
K = Pull Container Attacher to the front
Pull M = Container Attacher to the rear
If the container is coupled, decouple, move attacher so that he is out of range and only then you can decouple the trailer.
You can position yourself with the container exactly where you would like it.
Motor Config consists of the R730 and the chip tuning.
Tire Config consists of a steering axle and without. both Lizard Road and that stays that way!
You can buy bullfighters
Changelog:
Version 1.0.1.0
Revised sounds
Transmission revised
Engine output adapted to both
tested on alpine map
Version 1.0.0.9
Rail trailer:
Weight reduced
More stability from the dolly and the drawbar
Slipping of the dolly reduced to a minimum. (as soon as the container was secured, it began to slide while standing)
Version 1.0.0.9
Rear chassis renewed
Adjusted the weight of the vehicle
New engine sound V8 with gear
Dedi bug fixed
Rail trailer revised.
Weight handling adjusted
Container fixation changed, now runs on the normal fixation and now suitable containers can be used very easily, so I removed the containers and you now need at least the standard itrunner pack
Version 1.0.0.8
Revised sounds
Dedi bug fixed
Version 1.0.0.7
V8 decor inserted
Flash lights inserted
Grill lighting offset
Taillights replaced by the trailer
Version 1.0.0.6
Beam cone high beam processed.
Work light added.
Dedi error fixed.
The container can now be locked with X, mouse control deactivated.
Dynamic hose connections offset.
Tires of the trailer changed.
Pendant color choice inserted.
Mud flap installed on the trailer.
Version 1.0.0.5
License plate inserted.
Lights in the dashboard are now switchable.
Changed lighting of the speedometer.
Refined illumination of the sun visor.
Turn signal on front Scania optics rebuilt.
Decor lights mounted down the cab
Gear sound changed (sound in truck no longer sounds like wheel loader: D)
Version 1.0.0.4
Trailer completely revised
Indicator Config
Trailer Design config
Tacho needles revised
HKL control revised
Version 1.0.0.2
HKL fix, truck should no longer cause problems when rebooting
also wenn du den container vom anhänger aus entladen willst, dann kann ich dir nur empfehlen dir nen anhänger zhu holen mit HKL aufbau. mein schienentrailer ist zum transport des containers gedacht und nicht zum abkippen
Völlig normal wegen der hookliftextension, er knallt dort immer wieder neue input bindings rein, obwohl er schon welche hat. kann man getrost ignorieren. wenmn es stört muss ab und an die input bindings xml aufgeräumt werden. das problem hat giants auf der liste
Warning: Tried assigning the binding [(KEY_v), deviceId: KB_MOUSE_DEFAULT, axisComponent: +, index: 1, isActive: true, isShadowed: false isInverted: nil, isDown: false, isUp: false, inputValue: 0] to CHANGE_UNLOADING_TYPE_BUTTON to an occupied slot. The new binding has been ignored
Warning: Tried assigning the binding [(BUTTON_5, BUTTON_3), deviceId: 0_XINPUT_GAMEPAD, axisComponent: +, index: 1, isActive: true, isShadowed: false isInverted: nil, isDown: false, isUp: false, inputValue: 0] to CHANGE_UNLOADING_TYPE_BUTTON to an occupied slot. The new binding has been ignored
FS19_Scania_R730_HKL_by_Ap0lLo
also wenn du den container vom anhänger aus entladen willst, dann kann ich dir nur empfehlen dir nen anhänger zhu holen mit HKL aufbau. mein schienentrailer ist zum transport des containers gedacht und nicht zum abkippen
Völlig normal wegen der hookliftextension, er knallt dort immer wieder neue input bindings rein, obwohl er schon welche hat. kann man getrost ignorieren. wenmn es stört muss ab und an die input bindings xml aufgeräumt werden. das problem hat giants auf der liste
grüße Ap0lLo
Could yoy help me ? I have a error log :
Warning: Tried assigning the binding [(KEY_v), deviceId: KB_MOUSE_DEFAULT, axisComponent: +, index: 1, isActive: true, isShadowed: false isInverted: nil, isDown: false, isUp: false, inputValue: 0] to CHANGE_UNLOADING_TYPE_BUTTON to an occupied slot. The new binding has been ignored
Warning: Tried assigning the binding [(BUTTON_5, BUTTON_3), deviceId: 0_XINPUT_GAMEPAD, axisComponent: +, index: 1, isActive: true, isShadowed: false isInverted: nil, isDown: false, isUp: false, inputValue: 0] to CHANGE_UNLOADING_TYPE_BUTTON to an occupied slot. The new binding has been ignored
nice mod, the trailer had trouble when it was unloading it off because it stretched it and it went over the place
Hello. why don’t all textures always upload to me?
Great mod, but the trailer has to many warnings, so i deletet it again
Can you add a trailer hitch on the back of it? It’s a great truck, but I need it to move dollies aswell.
No puedo colocar el container en el trailer