KRONE BIG X 580 PACK V1.0.3.0
https://youtu.be/xdz4iQHwshM
This is all configurable via the utilization indicators:
– Everything like the standard chopper – no speed limit, no engine stalling
– load display in front above the steering wheel
– further monitor on the side, with utilization display and symbol of the fruit (which is being harvested)
– both displays – that is, load display in front and monitor
– XDisc and cutting unit carriage configuration added -> Attachment of the cutting unit as in the Claas DLC
– Edited shop pictures of XDiscs, pickup and header trailer
– Added color options for the support wheel of the Kemper Plus 375
– Co-driver inserted – the following mod is required Universal Passenger | ModHub | Agriculture simulator
– A few more ads inserted in the roof above and in the monitors
– in the roof above it is now indicated which lights (work lights) are switched on
– The current fruit and the utilization of the cutting unit are displayed in the configurable monitor
– extra monitor built in for the start check
– then in the montor of the armrest (large):
– Start picture of the BIG X
– Speed in numbers and via analog display
– Speed in numbers and via analog display
– Icon for cruise control – status and speed in numbers for setting
– Temperature display in bar form, numbers + icon which, depending on the temperature, turns green (everything is OK) and red (too warm)
– Icon for rotating beacon lights up when it is switched on
– Fill level display for diesel in bar form, numbers in%, number display for hours consumption as well as an icon (petrol pump) lights up red when the tank is empty
– Icons for start – top row from the left – light up red / orange at start and then go out or turn green
– AdBlue display in bar form, numbers in% and icon (blue fuel pump)
– Air display in bar form, numbers in% and as an icon – at the bottom – if there is not enough air, it lights up red
– Current InGame time of day in the top left corner
– Hectare display of the worked area in numbers
– Operating hours display
– Display by image whether the cutting unit is coupled or not (images created)
– Display by image whether the pipe is extended or retracted
– Odometer and trip meter installed – The odometer Mod from BPG is required for display [MOD] Kilometer display 1.9.0.4 – Black Panther Group Forum
– New sounds for chopper, hydrostatic sound added and cutting units (also working sounds for XDisc and Pickup)
– Increased steering angle when the trailer hangs on the ball head (increased angle from the trailer to the chopper)
– All warning lights come on when reversing
– Fix turnOnVehicle entry at Krone Easy Collect 600
– Shield for speed installed and configurable
– Sound built into XDisc cutterbars when you open them
– Weight configuration added 500 kg, 1000 kg and 1500 kg on the BIG X
– Displays in the monitors completely rebuilt
– Crown logo added to the seat of the BIG X.
– Added covers on the wheelhouses when tape drives are installed (self-built)
– Tape drives revised (blocked immediately when taking off the gas)
– MB number reduced
– 4 different configurable horns
– Kemper cutting units revised with regard to ConnectionHoses and supports when coupling and uncoupling
– Krone BIGX mount for connections at the rear (self-built)
– Added header trailer speed sign
Changelog:
Changes:
– ThreshingFlowIndicator.lua updated (dynamic adjustment of the speed depending on the utilization of the cutting unit, the engine power and other adjustments, e.g. dynamic chopping ejection)
– Logo on the GPS adapted to the crown
– Rear view camera installed unfortunately not configurable, therefore an extra xml installed
– fix warning components at Kemper 345
– Added rye to the Grain XDisc
– almost all logos newly adapted and revised
– Removed standard color choices
– all color choices changed and adjusted 🙂
– Engine configuration 480, 530, 580 and 630 installed (new decals created)
– Color choice for knife added to Krone Easycollect 600
– Kemperschneidwerke added some parts of the color choice
– Kemperschneidwerke color choice inserts for hoses (above holder)
– Ball head coupling made configurable
– fix hydraulic cylinder length for the cylinders from the intake
– fix steering cylinder
– Krone Collect 9 m added with all color choices like the 600
– fix movement hydraulic cylinder and spring at the end of the short pipe (in the original there was nothing)
– fix movement hydraulic cylinder and spring at the end of the middle pipe (in the original there was nothing)
– fix movement hydraulic cylinder at the end of the long pipe (in the original there was nothing)
– fix movement spring at the end of the long pipe (in the original there was nothing)
– fix the texture of the spring at the end of the long pipe which was white (in the original there was nothing)
– fix movement of the metal strut at the end of the long pipe on the side (in the original there was nothing)
– trailerTrigger enlarged
– added really wide tires
– fix decals from on the roof (already hung in the air from Giants) Deacls cut up and new pos.
– Auto contour (ground adjustment) inserted
– License plates adapted to engine variants
– Weights can now be configured up to 2000 kg (weight adjustment optimized)
– Tape drives made more dynamic
– ThreshingFlowIndicator WarnDecal added to the monitor when the load goes towards max
– Front, right and left windshield wipers installed and animated, material created (Wicher rubber) (in the original there was nothing animated, Giants probably forgot)
– various sound adjustments
– SolarBerttery Script installed and created a prototype of E-Häcklser
– Solar panels installed and holders created
– Heat flickers from the cladding installed (exhaust smoke) should represent the heat from the battery 🙂 (with the electric chopper)
– Added license plate for E chopper
– Display of utilization on the monitor changed
– Translation adjusted for the header carriage and xDisx header for the configuration for the attachment.
Changes:
– Installation of the threshingFlowIndicator.lua, thereby the utilization of the cutting unit is displayed and controlled.
– The engine stalls if you drive into the fruit too quickly with the cutting unit switched on
– Cruise control is automatically set to the respective maximum speed
– Different fruits have different maximum harvesting speeds
– the whole thing now depends on the width of the cutting unit (narrower cutting unit as specified in the standard -> chop faster / larger -> chop slower)
– Display of symbols of the fruit that is being harvested
– there is a problem with one fruit: with oats, barley is displayed as a symbol – unfortunately could not be solved (it is displayed correctly in the F1 window)
Credits:
Zetor6245
Modelle, Scripte und Texturen: Giants
Scripte: Addconfig,AddStorCategory und ChangeModTitle – Ifko[nator]
Script: tirePressure – Wobster
Umbauten – Zetor6245
Download mod
| File | File size |
|---|---|
FS19_MW_KroneBIGX580
|
58 MB |
MA